What is the introduction to the disassembly and installation methods of the rocker switch?
Release time:
2023-03-30
Electricity is essential in daily life. The use of electricity is closely related to switches. There are many types of switches, among which the secondary panel is a common switch. So what is the introduction to the disassembly and installation methods of the rocker switch?
What is the introduction to the disassembly and installation methods of the rocker switch?
Electricity is essential in daily life. The use of electricity is closely related to switches. There are many types of switches, among which the secondary panel is a common switch. So what is the introduction to the disassembly and installation methods of the rocker switch?
What is the introduction to the disassembly and installation methods of the rocker switch?
1. The lighting control of bending switches can be divided into two basic categories: static control (also known as switch control) and dynamic control (also known as lighting control). Switch control is a wall type joystick switch, circuit breaker, relay (contactor), real state switch (crystal tube, etc.), timer, sensor (including photoelectric sensor, human sensor, human sensor, sound sensor, infrared sensor, etc.) used for lighting Control; Lighting control is the use of lighting equipment for lighting control. Lighting control can save energy consumption, improve work efficiency, enhance flexibility, and exert excellent aesthetic effects.
2. Switches can be divided into manual and automatic. Manually control switches or lighting or the use of switches and lights to control lighting; The automatic control system uses clock components, photoelectric components, human body sensors, and other components or computers or motion control lighting. The setting of the switch should be based on the basic principles of easy management and energy conservation.
How to remove the rocker switch?
Firstly, use a straight screwdriver to pry it open in the middle gap between the switch and the middle. Firstly, pry open the panel.
Currently, you will see the screws on the inside, 4 up, down, left, right, and right. Use a screwdriver to remove the screws on both sides of the switch, and then pull out the entire switch panel to view the internal circuit.
If you don't know how to wire it, you can remember it or mark it with a marker. Then unscrew the wire and zero wire from the terminal to completely disassemble the entire surrounding switch.
4. How to purchase a switch
Good switch products in the housing market are usually used as PC materials to resist impact, have high temperature resistance, and are not easy to change colors. These features are very important for controlling the conversion of electrical appliances.
5. There are three main materials for material bending switches: silver nickel alloy, silver cadmium alloy, and pure silver. Silver nickel alloy is currently an ideal tentacle. They have good conductivity and hardness, and are not easily oxidized and rusted.
6. Looking at the structure, the current switch is mainly a large foot type, with a better appearance and feel than the previous thumb shape. Large joystick switches greatly reduce contact between hands and panel gaps and prevent accidental electric shock from wet hands. Nowadays, the advantages of high current switches are increasing, and the power load of the switch is higher, which is the moment when electrical equipment is powered.
The above is an introduction to the disassembly and installation methods of the rocker switch organized by the editor for you. What is it? I hope it can help you with the relevant content!
Related news
Yuen Fung Electronics (Shenzhen) Co., LTD.
Add: 603, Block B, Building 6, Zhonggang Plaza, No. 83, Zhanjing Road, Zhancheng Community, Fuhai Street, Baoan District, Shenzhen
Factory Address: No. 7 Yuxian Road, Liangjia Village, Shijie Town, Dongguan City, Guangdong Province
Tel：0755-33809280 33809281
0755-33809283 33809286
Email∶sunny@yuenfung-ec.com
Copyright © 2023 Yuen Fung Electronics (Shenzhen) Co., LTD. Technical support:www.300.cn SEO Business license